Adjustable front struts for Mustang who's to run?
 

Fox body Mustangs 79-93 with an auto. Who has the better struts? Single adjustable or double adjustable. Is doubles worth the extra money in a 11 to 12 second stocker. Singles are about $100 each doubles are about $450 each.

Re: Adjustable front struts for Mustang who's to run?
 

When I ran my 89 in Stock I used normal 90/10's with Moroso Trick front springs. Make sure the control arm bushings fit smoothly in the K member with no bind. I would 60' in the low to mid 1.50's when it ran low 12's in N/SA or G/FIA. Going high 11's or low 12's you dont need double adjustables IMO. For the money I would buy the single adjustables from Strange Engineering. Hope this helps.
Jay

Re: Adjustable front struts for Mustang who's to run?
 

I'm currently using QA1's.

Re: Adjustable front struts for Mustang who's to run?
 

Contact Calvert Racing, he was swapping struts quite a bit in testing the new CJ500. I'll bet he has a new product.

Re: Adjustable front struts for Mustang who's to run?
 

Run the Alum. bodied single Qa1's on my Edge mustang, work fine and shed a few pounds off the nose. Joe

Re: Adjustable front struts for Mustang who's to run?
 

in my experience, the adjustable struts only fit an 87-up. They have larger front brakes and different spindles from the 79-86. The QA1's wouldn't fit my 84 model and Strange only lists their adjustable units for 87-up.

Re: Adjustable front struts for Mustang who's to run?
 

I am building my 85 using 94-95 spindles so that the 87 and up struts will fit. I have also been told those spindles will improve the handling. The spindles are a bolt in upgrade but need some minor accessories if you retain the old style struts. I believe a different tie rod emd is also used, I am at work and don't have the info at hand.
It is such a common swap that Late Model Restoration even has a kit.

http://www.latemodelrestoration.com/...1&comp=LRSeven

Re: Adjustable front struts for Mustang who's to run?
 

My car is a GT 350. I had to put a ball joint on it last spring before I left for Mooresville.
I got one for an 84 GT and it did not fit. I went back and asked for one for an 84 SVO and it fit.
My car, being a 20th anniversary model, must have a conglomeration of parts, but the adjustable struts still did not fit.
Chris Alstons chassis works also makes a double adjustable strut for the fox body cars.

I have run lakewoods on my car for 10 years.

Re: Adjustable front struts for Mustang who's to run?
 

Santuff if you have more money than you know what to do with, or QA-1's if you want the most bang for the buck. Works on my car.

Sean

Re: Adjustable front struts for Mustang who's to run?
 

Thanks everybody for the input. Still doing research don't have enough money for the Santuff or the Varistruts. The QA1 looks very good and shaves a few pounds off the front. Still have lots of work to do before the first race in May to the 90 Mustang. All ready aquired the Moroso front springs.

Wheels up everybody

Re: Adjustable front struts for Mustang who's to run?
 

Let us know how you make out installing those Moroso front coils in your Mustang. I have a pair that I`d like to install in my car, but you can`t use a normal coil spring compressor on a FOX Mustang, and they are so long that I`ve never had any luck installing them by letting the lower control arms hang from the inner pivots. Anybody ever install these springs (uncut) in a FOX without using the factory type Ford spring compressor?

Re: Adjustable front struts for Mustang who's to run?
 

Rory I have only done it with about 5/8 of a coil cut out on a freinds car it was still not easy. I am going to try uncut when I buy some struts. I will let you know how it goes.

Re: Adjustable front struts for Mustang who's to run?
 

I have Eibach drag springs on my car. I made my own spring compressor, but it was very tough to get them in. I don't know how the Moroso's compare to the Eibachs.

Re: Adjustable front struts for Mustang who's to run?
 

I'm not familiar with how the factory type Ford spring compressor looks like, but I have put in uncut Moroso dragsprings on my FOX using a compressor that I believe is designed to be universal, but also fits the Mercedes springs. Its a fine threaded rod that is inserted on ths inside of the spring, then put in removable brackets on the second coil top and bottom and compress until coil bind. (I usually secure the spring here with a strap to prevent it from being able to pop out at vany point.)
Raise the A-arm to "catch" the bottom of the spring, using a jack. When fully raised, start loosening the rod, and finally remove it through the hole in the A-arm located in the center of the spring seat and remove the brackets.

I found a picture (attached) of how this compressor looks like when in pieces. This is from a Swedish store, but I'm pretty sure you can find it in the US as well.

I hope this explanation is understandable and useful.

/Joakim, Sweden N/S 88 Mustang

Re: Adjustable front struts for Mustang who's to run?
 

Check out www.maximummotorsports.com

They sell a front spring install tool for $13.95 that is a big help in installing front springs.

Part # MMT-8