CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Harmonic Balancer bolt (https://classracer.com/classforum/showthread.php?t=89322)

Mike Taylor 3601 03-31-2025 05:23 PM
Re: Harmonic Balancer bolt
 
Quote:
Originally Posted by Dirk Olson (Post 711003)
Not sure about that, on a SS or Comp Combo @ 390 on the seat and @ almost a 1000 over the nose it is a struggle to pull the motor over by hand especially with the plugs in. we always bump it with the starter when checking valves. As far as a bolt goes use a ARP bolt, should good to go.
the ARP 134-2503 is specifically made for turning the engine.
with all the rockers on and adjusted should be fine.
Rockers on one cylinder, probably not a good ideal

Ed McLawhorn Jr. 04-01-2025 09:37 AM
Re: Harmonic Balancer bolt
 
Quote:
Originally Posted by Mike Taylor 3601 (Post 711009)
the ARP 134-2503 is specifically made for turning the engine.
with all the rockers on and adjusted should be fine.
Rockers on one cylinder, probably not a good ideal
Thanks for the part number Mike.


All times are GMT -4. The time now is 06:17 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.