CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Wheel issue (https://classracer.com/classforum/showthread.php?t=84481)

Dave Turner 03-28-2023 10:37 PM

Re: Wheel issue
 
Quote:

Originally Posted by Rose Racing (Post 678142)
Jegs disc brakes

3” studs (1/2” should be fine) and open end acorn nuts are the ticket.

Rose Racing 03-29-2023 11:14 PM

Re: Wheel issue
 
Quote:

Originally Posted by Dave Turner (Post 678144)
3” studs (1/2” should be fine) and open end acorn nuts are the ticket.

Okay thank you Dave

FED 387 03-30-2023 12:28 AM

Re: Wheel issue
 
save your time chasing unknown wheel vibration gremlins and buy a set of hub centric rings they come in many sizes and are made of aluminum OR plastic---about $8-14 a set of 4 (you only need 2) one for each wheel depending on the size and the supplier --Amazon has them $14 or so ---- you are gonna end up buying them eventually ---just for the record the hub supports the weight of the car the wheel studs are designed to clamp the wheel to the axle NOT support the weight of the car---over time the studs may bend or break because of the load put on them---its your choice do what you want but do a little research and read up on this----Good luck FED 387

JGrossijr 03-30-2023 12:31 AM

Re: Wheel issue
 
Search "Hub Centric Ring Adapter Set"
Lots of options


All times are GMT -4. The time now is 05:14 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.