CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Cowl area at back of hood (https://classracer.com/classforum/showthread.php?t=78462)

sterling simmons jr 02-01-2021 07:59 PM
Re: Cowl area at back of hood
 
Just remove the water pump and motor comes right out from the top leave the hood alone did it this way for 15 years with a 98 Camaro remove radiator and good to good

SSDiv6 02-01-2021 08:21 PM
Re: Cowl area at back of hood
 
Quote:
Originally Posted by KRatcliff (Post 633440)
I have taken mine out from the bottom and can do it far quicker from the top using one of these. I disconnect the hood struts, bungee it back, and pull the plastic pins holding the cowl in place.

https://cdn.shopify.com/s/files/1/02...0_crop_top.jpg

https://tpis.com/products/9_hhk299?v...28342560555080
Of course Kyle...we know why you can do it quicker from the top... it is called the "Happy Hooker" Lift Plate!!! :D :D

Dyno 02-01-2021 08:26 PM
Re: Cowl area at back of hood
 
I used the Happy Hooker lift plate many times on my 95 Camaro. Easy to do.

Mark Yacavone 02-01-2021 11:30 PM
Re: Cowl area at back of hood
 
I made this deal for a V6 a few years ago. Still the top of the plenum and the oil pan hit at the same time. But, I like to build them on the stand, drop in, plug in.

If it was my car , I would have attacked it with a porta-power and a torch.

https://i.postimg.cc/3xC8DPfh/20180413-123203.jpg


All times are GMT -4. The time now is 09:38 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.