Re: 350/255 Chevy
Yes, a Super Stock profile can be ground on a stock journal cam core.
No, you will not have nearly enough piston to valve clearance with Stock Eliminator pistons and a competitive, even marginally competitive Super Stock cam. No, legal Stock Eliminator cylinder heads will not be competitive in Super Stock, and no, they will not likely work with the appropriate valve train for a Super Stock camshaft without major modifications. And no, the short block you describe will not withstand running it like it is a competitive Super Stock engine. Do yourself a favor, and build a good legal Stock Eliminator engine. Consider a combination that isn't utterly flogged to death. |
Re: 350/255 Chevy
Dan, why don't you just do a 350/250/230 and call it a day. You can use all of your 255 stuff and it fits into O/P/Q so not a lot of heads-up stuff. All you'll need is an intake and the right carb.
|
Re: 350/255 Chevy
Quote:
|
Re: 350/255 Chevy
Quote:
|
Re: 350/255 Chevy
Quote:
In O/SA would be fairly light. Not have to worry about a roll bar and fancy seat belts.. Yeah do not want to cut up a set of Stocker heads. D |
Re: 350/255 Chevy
What Billy said would certainly be the easiest way to get out. it will live a long time with a 2GC I have not looked in a while, but I think 230 is now 226. If it was light in O, you would really have to load up to get to Q. I think P is the way to go at 13.45. Good Luck
MJ |
Re: 350/255 Chevy
Do the 2Bbl stocker,just the changes you would have to make for a budget SS engine would cost more than a complete decent stocker engine. Been there done that.
|
Re: 350/255 Chevy
Quote:
Should be painted in few weeks finally. Needs glass and interior. Leon Miranian has the trans. Need roll bar and fuel system. Engine has 4bbl and two Qjets rebuilt for K/SA.. Currently an Impala, but can convert to Biscayne or Bel Aire. Do not have a place to work on it conveniently. |
Re: 350/255 Chevy
Quote:
Doesn't need a roll bar with the 2 bbl combos. How do you convert an Impala into a Bel Air or Biscayne..pray tell? |
Re: 350/255 Chevy
Quote:
|
All times are GMT -4. The time now is 08:06 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.