CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   1970 Mustang 428 CJ part number needed (https://classracer.com/classforum/showthread.php?t=67940)

Jim Caughlin 10-19-2017 06:20 PM
Re: 1970 Mustang 428 CJ part number needed
 
The nice thing about putting header bolts in an FE head in a Mustang chassis is that good eyesight is not required, all bolts are fitted via Braille...

Jim Caughlin
SS 6019

Rory McNeil 10-19-2017 06:56 PM
Re: 1970 Mustang 428 CJ part number needed
 
Quote:
Originally Posted by Jim Caughlin (Post 548138)
The nice thing about putting header bolts in an FE head in a Mustang chassis is that good eyesight is not required, all bolts are fitted via Braille...

Jim Caughlin
SS 6019
I guess some might consider that a "nice " thing Jim! And when you drop any of the header bolts, 9 times out of 10 they don`t make it to the floor.

Mike Gray 10-19-2017 07:25 PM
Re: 1970 Mustang 428 CJ part number needed
 
^^^X2 ^^^
I think I have done at least 6-7 sets, once you memorize the wrench, socket, extension, from top or bottom and what sequence it gets easier!


All times are GMT -4. The time now is 03:58 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.