CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Mopar guys help please. (https://classracer.com/classforum/showthread.php?t=56814)

Michael K 02-13-2015 11:23 AM
Re: Mopar guys help please.
 
Quote:
Originally Posted by GTX JOHN (Post 461759)
Goodyear 4457 9 x 30 will fit - no sweat even without offset hangers.

We even run them on both our late 60s Valiants that have much smaller
fender wells.

The radials do not grow as much and have a narrower center section( I
Think about 12.5 inches ).

Again 10 inch rim with 5 BS or 8 with 4. You can add another 1/2 inch
BS with the offset Kit ( Move it about .8 despite what Mopar used to claim.

Calvert makes a narrow rear spring which would help(I do not have it)



John - do you have the Calvert part number for this narrow spring? Split mono, I assume?

Thanks - Mike.

Sorry to the OP, no hi-jack intended.

Grumpy 427 02-13-2015 02:23 PM
Re: Mopar guys help please.
 
No worries. Clean out your in box John please.

GTX JOHN 02-13-2015 03:46 PM
Re: Mopar guys help please.
 
Mike: Call John Calvert Racing direct in Lancaster Cal. I will take to him
in Phoenix next week....I do not think it is in Catalog yet but is .available now.

I cleaned out the box.....It does that a lot (That is Fill Up)!

Bill Edgeworth 02-13-2015 09:12 PM
Re: Mopar guys help please.
 
Calvert makes a kit that fits inside the Mopar inboard spring kit boxes. (Where you notch out the rear frame and weld in the boxes). On my duster I used this kit with tubs and was able to fit the M/T 12.2 radial on the car. It did however take substantial trimming at the front and back of the wheel well. If I recall correctly I used 10x12 wheels with 7" back spacing.

Grumpy 427 02-16-2015 08:43 PM
Re: Mopar guys help please.
 
Any pics for me yet John?

GTX JOHN 02-17-2015 02:45 AM
Re: Mopar guys help please.
 
I will have Jon Jr send to you...I am traveling this week

Phillip marvetz 02-25-2015 03:11 AM
Re: Mopar guys help please.
 
I run the M/T 10.5 29.5 on my bracket car with a B body housing with a 5.5 bs with the offset hangers and no wheel tub or lip modifications. It is super tight ( IE it rubs everywhere) but it works.


All times are GMT -4. The time now is 04:40 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.