Re: Stocker info needed
 

Yes, the 'factors' are correct.

327/250 fits at the bottom of M/SA, so you can run L and N also. Minimum weight is 13.50 (L), 14.00 (M) aand 14.50 (N) x 245 (the NHRA Rating on the motor) plus 170 (for driver weight) = min wt, across scales, with driver.
L/S-L/SA = 3,477.5 minimum weight
M/S-M/SA = 3,600 min wt
N/S-N/SA = 3,722.5 min wt

327/275 has been derated to 265 in Stock. Same rules apply. 13.49 is the very bottom of K/SA, you can run J and L also. SO you would use weight break (12.5 for J, 13.00 for K, 13.50 for L) x 265 + 170 = minimum weight at conclusion of run with driver.

Re: Stocker info needed
 

I was looking at Malibu station wagon, but I'm not up on the wagon nuances. If it is what you say here is the way it would shape up -

327/245 - 14.29 @ natural M is 3501lbs + 170lbs driver weight = 3671lbs. Minimum weight @ M would be 3430 + 170 = 3600.

327/265 - 13.32 @ natural K is 3530lbs + 170lbs driver weight = 3700lbs. Minimum weight @ K would be 3445 + 170 = 3615.

Re: Stocker info needed
 

I found it under chevelle.......it is badged chevelle nomad custom. They are origional emblems because my father has owned the car ever since I could remember (I was born in 73). Thats how I found the numbers I posted earlier.

I found a compression, carb, cylinder head, intake, bore, stroke, rod length. Is that it? No cam rule or do they just figure you can only fit so much in that package. Does it have to be a powerglide or can it be a 3 speed?

Re: Stocker info needed
 

OEM lift which is 390/410 for the 327's, any duration. Look at the blueprint spec's for 1968 and it will show all carbs, heads, intakes, ect. for those combos...some parts may be superseded and aftermarket allowed. Any transmission with a maximum of three forward speeds allowed, same manufacturer as car. Between the rulebook, blueprint guides and aftermarket approved products you should be able to get a good grasp of what is needed. Plenty of folks here will be glad to answer questions as they come up I'm sure.

Re: Stocker info needed
 

You guys have been a big help already, thank you.

Re: Stocker info needed
 

So, how does how does a fat *** driver like me make the weigh?

Am I balast to move up a class?

I'm 265 lbs.

I want to try my 96 Cougar at the Orlando D2 race.