Re: Shubeck style lifters
 

Cliff Sherman's contact info???

Re: Shubeck style lifters
 

Tool steel lifters set up for NHRA / IHRA are available here:
http://www.precisionenginetech.com/p...solid-lifters/

Re: Shubeck style lifters
 

Are these lifters legal with a hydraulic camshaft, like the Schubecks? Their webpage says solid lifter.

Re: Shubeck style lifters
 

My boo-boo. The previous response was for a industry newsletter.
Here is Trend. They don't show it but I called to confirm the offer a .012" "cheater" hydraulic lifter which satisfies NHRA / IHRA requirements.
Price for a set of 16 .904" Chrysler quoted was $610 with a micro-polish finish, $661 with an EDM oil feed at the foot or $1,285 for their coated body (EDM not available on coated as the coating would flake off). These are street prices.
http://www.trendperform.com/index.ph...ts&type=lifter

Also see Precision Products Performance - PPP as they also offer tool steel lifters that will work. Or contact Sherman.

Re: Shubeck style lifters
 

Greg, Trend and PPPC are a start. Depending on the pressure over the nose of the cam you can get recommendations. I just recently read on another forum concerning these lifters. Mike Jones (camking) of Jones cams can point you in the right direction. Ferrea also markets a tool steel lifter. Depending on your core there are DLC and nitride coatings.