CLASS RACER FORUM
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Wiring a stocker? (https://classracer.com/classforum/showthread.php?t=28779)

Ken Miele 10-02-2010 07:44 AM
Re: Wiring a stocker?
 
Robert,

You would need to contact Biondo racing to what options they have.

When it comes to wiring I get pretty anal. By far this is the best panel I have ever used. ARC is a nice setup, but they do not offer the features that the Mega Panel does. The Maga Panel was designed by Biondo Racing, and is well though out.

Steve, very minor difference between K&R and Biondo. The price is one and the style of coarse. I like the round illuminated start button, very nice and very trick. The Biondo Maga Panel also comes in many different configurations.

Mack Reeves 10-02-2010 08:33 AM
Re: Wiring a stocker?
 
Quote:
Originally Posted by Robert Simpson (Post 214057)
Gary, I will call you later about the switches, thanks for the reply. Is this what you put in the stocker? Or the SS only?

Mack, is this what you are putting in your new car? That does look trick.

Ken, that is what I was thinking. Did not know Biondo sold that. Do you know if they will produce a switch panel with more switches that what was shown? I have a switch for my 3 step etc?

Thanks guys keep the ideas coming.

Robert
Robert, Yes I'm putting the K&R in the new car... I also have one in my Barracuda that has been there for 4 or 5 years... Not as much as a blown fuse... I'm sold on K&R...... The K&R also comes complete with marked and color coded wire, wire ends, shrink wrap and wire ties... Just run your supplied power to relay/fuse panel and pull supplied wires from there.... I'll try to get a picture of mine..... Just my .02........ Mack

Greg Hill 10-02-2010 10:59 AM
Re: Wiring a stocker?
 
Quote:
Originally Posted by Stevie Ficacci (Post 214129)
the ARC (116-8000R) and Biondo (DDI-1036-B) switch panels are about $250 and the K+R (572-SD-SPD) panel is $500. whats the difference?
Steve, the K&R is much more than just a switch panel it includes a circuit board with all relays, premium wiring that is marked every 6 inches, all connectors, heat shrink, and one cord that goes from the switch panel to the circuit board. i used this on my son Andrew's car last winter when I built it, and I am going to re-wire my car this winter with the K&R product. Check it out on their web site.You will not be sorry you used this. A lot of the finest car builders in our industry are using this including PK race cars and B&B race cars.

Mack Reeves 10-02-2010 03:10 PM
Re: Wiring a stocker?
 
Robert here is the K & R Switch panel... As Greg already said one cable from this to relay/fuse panel...

http://i882.photobucket.com/albums/a...g?t=1286046374





http://i882.photobucket.com/albums/a...g?t=1286046490


Sorry for the BIG pictures...

Robert Simpson 10-02-2010 07:49 PM
Re: Wiring a stocker?
 
Quote:
Originally Posted by Mack Reeves (Post 214246)
Robert here is the K & R Switch panel... As Greg already said one cable from this to relay/fuse panel...

http://i882.photobucket.com/albums/a...g?t=1286046374





http://i882.photobucket.com/albums/a...g?t=1286046490


Sorry for the BIG pictures...
Mack, thank you for the pictures, they are just the right size. Are you mounting your MSD close to that panel? Thanks and I will look into what everyone suggested.

Kirk Morgan 10-02-2010 08:03 PM
Re: Wiring a stocker?
 
There is one small draw back on that K&R panel. There is one 15 amp fuse that controls the power to the switch panel harness and if it pops you have no switch panel functions at all. Emmons was fighting this problem on there Camero at Ennis last weekend. It appears the alt. was causing this problem, but there a couple of other items on that circuit that could be the problem.

Mack Reeves 10-02-2010 08:36 PM
Re: Wiring a stocker?
 
No Robert... I'm using the FAST ingition..... Mounted under the dash.... Mack

Robert Simpson 10-02-2010 09:51 PM
Re: Wiring a stocker?
 
Quote:
Originally Posted by Kirk Morgan (Post 214270)
There is one small draw back on that K&R panel. There is one 15 amp fuse that controls the power to the switch panel harness and if it pops you have no switch panel functions at all. Emmons was fighting this problem on there Camero at Ennis last weekend. It appears the alt. was causing this problem, but there a couple of other items on that circuit that could be the problem.
Kirk, I did not know this. What other items on that circuit do you think there is a problem? Are the Emmons considering changing?

Robert Simpson 10-02-2010 09:54 PM
Re: Wiring a stocker?
 
Quote:
Originally Posted by Mack Reeves (Post 214277)
No Robert... I'm using the FAST ingition..... Mounted under the dash.... Mack
Sorry Mack I knew you are finishing a new DP...really I knew it...LOL...Thanks again.

Robert Simpson 10-02-2010 10:08 PM
Re: Wiring a stocker?
 
Quote:
Originally Posted by Ken Miele (Post 214053)
Robert,

Here is a link to some nice switch panels that I have used myself. You can't beat it for quality and ease of use and install. They come with everything you need, very trick.

http://www.biondoracing.com/MegaPanel.shtml

http://www.biondoracing.com/images/s...-1049-MP-C.jpg
Ken, is your "fuse panel" mounted on a same panel as your ing box? If possiable would you send me a picture of how yours is layed out? I will e-mail Biondo next week. I like the ARC but I have a problem with the switches, if one goes out you are in a world of hurt. I mean you can not just replace the one switch. Thanks again.


All times are GMT -4. The time now is 11:17 AM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.