CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Holley Carb Question (https://classracer.com/classforum/showthread.php?t=19887)

X-TECH MAN 08-26-2009 10:38 AM
Re: Holley Carb Question
 
Quote:
Originally Posted by BlueOval Ralph (Post 136665)
Still have one in my old Holley parts, the gear drive and the squirter Y
I had one on my new at the time 68 Z-28. The car had zero torque with the factory 3.73 gears, 2.20 low gear trans and by going to a manual secondary set up with the squirters it ran better on the street. The 5:38 gears made it run even better but it was rough to drive on the Washington D.C. beltway with those gears.

John Lang 08-26-2009 08:43 PM
Re: Holley Carb Question
 
Quote:
Originally Posted by Bub Whitaker (Post 136565)
Yes ur old... installed that kit on my L79 66 Chevy II...
You guys think your old ! Just the other day I was digging around in some old boxes of carb parts, and came across the kits your talkimg about, with the gear drive, the long squirters, etc, and I thought I was old ! John...........

Phillip marvetz 08-26-2009 10:30 PM
Re: Holley Carb Question
 
Quote:
Originally Posted by Mike Gray (Post 136529)
Wow, you guys confirmed what the seller told me about the holes. (For secondary pump shot)
The carb is an 850cfm list #3418.
Regarding what it's going on, it's not an L88 '67 Vette, can anyone guess what it's for?
Now back to the question, will the holes get through tech?
I'm going to try Bob's suggestion and see what they say.
nascar hemi.

Mike Gray 08-27-2009 11:18 AM
Re: Holley Carb Question
 
Quote:
Originally Posted by Phillip marvetz (Post 136839)
nascar hemi.
Don't know if it's right for the hemi or not. I'm using it on a Ford.

blasttime 08-27-2009 04:37 PM
Re: Holley Carb Question
 
Them there holes is for bolting chain to yank engine :D

Mike Gray 08-28-2009 02:10 PM
Re: Holley Carb Question
 
Div. tech director said okay as long as I don't grind the divider plate to clean up around the holes.


All times are GMT -4. The time now is 08:25 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.