Re: Original Hemi Cuda Info.......
 

Found this on Craigslist:

1968 hemi barracuda race car rooler no engine or trans body only - $25000 (BLOOMSBURY)

1968 barracuda race car roller no engine or trans, mark Williams 456 pro gears gun drilled axles ,ford rear,headers ,drive shaft included, put your 426 hemi back in
car with your trans and race ,all electrical in car with everything you need to get back on track any questions call Anthony 908-581-3844,,,,,,,,,,,,,,,,,,this car is $25,000 for body no engine or trans. headers and drive shaft included............cert 8.50 good until 2019 nice straight body rust free 4 link you could not build for $25,000 not street legal , race track only,

That's a great deal. John Tedder's old car too.

If I had the 25K I'd buy it today and wouldn't have to travel far to pick it up. But I don't.
That's been the story of my life. :( But IF I did, I'd buy it and make a street car out of it.

http://115.imagebam.com/download/_Z-.../motech-01.jpg

http://115.imagebam.com/download/lLK.../motech-02.jpg

http://115.imagebam.com/download/pCJ.../motech-03.jpg

http://116.imagebam.com/download/ihZ.../motech-04.jpg

http://116.imagebam.com/download/UV_.../motech-05.jpg

http://115.imagebam.com/download/bU0.../motech-06.jpg

http://116.imagebam.com/download/fZE.../motech-07.jpg

http://116.imagebam.com/download/ANc.../motech-08.jpg

http://115.imagebam.com/download/ny2.../motech-09.jpg

http://116.imagebam.com/download/9uf.../motech-10.jpg

https://newjersey.craigslist.org/cto/5800196335.html

Re: Original Hemi Cuda Info.......
 

http://116.imagebam.com/download/ly5...r_car_show.jpg

http://115.imagebam.com/download/kN5..._mr_motech.jpg

http://115.imagebam.com/download/XlK...r_motech-2.jpg

Re: Original Hemi Cuda Info.......
 

http://116.imagebam.com/download/jjc...edder_pits.JPG

http://115.imagebam.com/download/fNe...der_pits-2.JPG

http://115.imagebam.com/download/11O...der_pits-3.JPG

http://116.imagebam.com/download/Dx7..._launching.jpg

Re: Original Hemi Cuda Info.......
 

Pete
Agreed Great car for the money for sure. Was this the only body he used throughout the years?

Liteweight

Re: Original Hemi Cuda Info.......
 

To the best of my knowledge. Prior to this car John had a 1968 440 GTX hardtop and 1969 Hemi GTX convertible.

Pete

http://114.imagebam.com/download/Usz...r%20-%2059.jpg

http://114.imagebam.com/download/cAZ...onvertible.jpg

Re: Original Hemi Cuda Info.......
 

I am assuming due to price this is not a BO29.

Would love to get those old Keystone. Especially those rears with that offset.

Liteweight

Re: Original Hemi Cuda Info.......
 

John Tedder had 2 cudas , the car shown here for sale and another car formerly owned by Chuck Comella a few years ago that was black when Chuck owned it and he ran it at Indy one year . The former Tedder / Comella owned car carried a BO29 vin .

Re: Original Hemi Cuda Info.......
 

I sold the rear keystones to Bucky Hess. Give him a call maybe he will sell them

Re: Original Hemi Cuda Info.......
 

Here are some of our pictures of John
1974 Milan
http://thumbnails116.imagebam.com/50...e507678165.jpg
at Milan
http://thumbnails116.imagebam.com/50...d507678170.jpg
1974 Indy
http://thumbnails116.imagebam.com/50...2507678174.jpg
1977 Springnts SS/HA
http://thumbnails116.imagebam.com/50...7507678173.jpg
1975 Winternts.
http://thumbnails116.imagebam.com/50...8507678163.jpg

Re: Original Hemi Cuda Info.......
 

Thanks Chuck. I'll do that. Where did the front keystones land up?
Do you have any original Hurst stuff lying around you'd be interested in selling?

Liteweight

Re: Original Hemi Cuda Info.......
 

Got ahold of Bucky today.He told me he gave those wheels to Pete and Jack Toms LO23. They went on a great car.

Liteweight

Re: Original Hemi Cuda Info.......
 

those will be 15 x 4 on the front. You think the rears are 15 x 7? Kinda was all there was back then but a 9" to 10" slick still fit.
Is that what you're looking for Daryl?
Weatherman dumped snow on us so it looks like the dart won't get one more beer run/rip this year.

Re: Original Hemi Cuda Info.......
 

Re: Original Hemi Cuda Info.......
 

what are you looking to buy?

Re: Original Hemi Cuda Info.......
 

Always looking for interesting original 68 SS Hemi stuff in general Chuck. Righr now Im in need of the original alluminum seat mounts

liteweight

Re: Original Hemi Cuda Info.......
 

[QUOTE=Liteweight;522444]Always looking for interesting original 68 SS Hemi stuff in general Chuck. Righr now Im in need of the original alluminum seat mounts

liteweight[/QUOTE message me

Re: Original Hemi Cuda Info.......
 

http://st.hotrod.com/uploads/sites/2...40%3B%2A%2C%2A
Not sure if picture will show up and might not be proper year for this thread but a 70 hemi cuda. Picture from Bowtie Hog on another site

Re: Original Hemi Cuda Info.......
 

Re: Original Hemi Cuda Info.......
 

Van brussard papa cuda

Re: Original Hemi Cuda Info.......
 

Re: Original Hemi Cuda Info.......
 

Re: Original Hemi Cuda Info.......
 

Anyone which car this certi-card belongs to?

Re: Original Hemi Cuda Info.......
 

Kind of hard to read but I believe the VIN is:

B029M8B299147

Everyone agree?

Bill

Re: Original Hemi Cuda Info.......
 

Yes correct VIN above. It is on moparts.com also.

Re: Original Hemi Cuda Info.......
 

If my info is correct ,it was at the 93 hemi reunion at Carlisle and the 2008 hemi reunion in Ohio, if correct car is in Florida owned by Paul Emero and is the car Ray Christian originally had ,not the clone he built after selling this car .
Maybe someone can confirm this.

Re: Original Hemi Cuda Info.......
 

Re: Original Hemi Cuda Info.......
 

The card is being reunited with the car, anyone interested in the rest of the story can check it out on Moparts.com.

http://board.moparts.org/ubbthreads/...ml#Post2247152

Re: Original Hemi Cuda Info.......
 

Great story and a "stand up" guy to get that done for nothing but the right reason. No 💰💰💰💰💰💰 at all. Congrats to him!

Re: Original Hemi Cuda Info.......
 

Not sure if this was posted before....

Re: Original Hemi Cuda Info.......
 

Don't remember seeing it.
Great picture.




http://classracer.com/classforum/att...4&d=1493138952

Re: Original Hemi Cuda Info.......
 

From Facebook.

Re: Original Hemi Cuda Info.......
 

Thanks for posting, but any idea what year?
It seems the front lower wheel lip has been trimmed...?

Re: Original Hemi Cuda Info.......
 

Re: Original Hemi Cuda Info.......
 

From Facebook, Billy "the kid" Lyons

Re: Original Hemi Cuda Info.......
 

http://classracer.com/classforum/att...5&d=1494979649

Re: Original Hemi Cuda Info.......
 

Anyone know any info on the Hemi Power Cuda a couple posts back. It had Kelly Chrysler-Plymouth on it and I am trying to track some info on another car from there and maybe some fresh names can help.

Re: Original Hemi Cuda Info.......
 

Spyphish !





http://4.bp.blogspot.com/-lRtl-Xuiw9...0/DSC_0552.JPG

Re: Original Hemi Cuda Info.......
 

Re: Original Hemi Cuda Info.......
 

Facebook

Re: Original Hemi Cuda Info.......
 

lots of good pics,i never seen before is on facebook