CLASS RACER FORUM
Page 10 of 13 « First 89 10 1112 Last »
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Class Racer Builds (https://classracer.com/classforum/forumdisplay.php?f=58)
-   -   The "eBay CJ!" (2010 Mustang CJ 352 Build) (https://classracer.com/classforum/showthread.php?t=63914)

FireSale 02-20-2019 11:34 AM
Re: The "eBay CJ!" (2010 Mustang CJ 352 Build)
 
1 Attachment(s)
Quote:
Originally Posted by JHeath (Post 582989)
There is lots of room
That beats my '68 with a stick!

Todd Gross 02-20-2019 11:53 AM
Re: The "eBay CJ!" (2010 Mustang CJ 352 Build)
 
Quote:
Originally Posted by JHeath (Post 582934)
Set the engine in to double check fit, and look at bellhousing and transmission placement.
Awesome seeing a bellhousing behind that 352!

JHeath 02-20-2019 12:38 PM
Re: The "eBay CJ!" (2010 Mustang CJ 352 Build)
 
Quote:
Originally Posted by JMan (Post 583017)
Awesome seeing a bellhousing behind that 352!
The ONLY way to race !

JHeath 03-01-2019 11:02 PM
Re: The "eBay CJ!" (2010 Mustang CJ 352 Build)
 
1 Attachment(s)
Finally moved it out of the garage, off to get some headers built.

JHeath 03-01-2019 11:09 PM
Re: The "eBay CJ!" (2010 Mustang CJ 352 Build)
 
1 Attachment(s)
Looks pretty good in the snow.

JHeath 03-18-2019 09:43 PM
Re: The "eBay CJ!" (2010 Mustang CJ 352 Build)
 
2 Attachment(s)
Picked up the car today, headers are done. Finally nearing the end of major fabrication, about all that is left is to modify the clutch fork, and the linkage for it, and plumb the brakes, and fuel system.

J.R. Haddad 03-18-2019 10:27 PM
Re: The "eBay CJ!" (2010 Mustang CJ 352 Build)
 
Headers look very nice. Who built them? J.R.

john lemoine 03-18-2019 11:29 PM
Re: The "eBay CJ!" (2010 Mustang CJ 352 Build)
 
jerry that looks like a real nice job wish he could have made a jig for me to get a set he sure builds a nice set of headers

Kirk Morgan 03-19-2019 10:30 AM
Re: The "eBay CJ!" (2010 Mustang CJ 352 Build)
 
They look very nice. What size are they and are they stepped?

JHeath 03-19-2019 02:43 PM
Re: The "eBay CJ!" (2010 Mustang CJ 352 Build)
 
Quote:
Originally Posted by J.R. Haddad (Post 585196)
Headers look very nice. Who built them? J.R.
Jay Bouley in Zimmerman ,Mn built them, he did an outstanding job. They might not have the latest " trick of the week" , but they are a good starting point , and just like nearly every part on a race car, if I choose to, can always build another set.


All times are GMT -4. The time now is 10:41 AM.
Page 10 of 13 « First 89 10 1112 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.